Planer-Thicknesser
A3-26 / A3-31 / A3-41
© Felder KG
KR-FELDER-STR.1
A-6060 Hall in Tirol
Tel.: +43 (0) 5223 / 45 0 90
Fax.: +43 (0) 5223 / 45 0 99
E-Mail: info@hammer.at
Internet: www.hammer.at
HAMMER
Attention!
The machine must be inspected immediately upon arrival. If the machine has been damaged during
transport, or if any parts are missing, a written record of the problems must be submitted to the
forwarding agent and a damage report compiled. Also be sure to notify your supplier immediately.
For the safety of all personnel, it is necessary to conscientiously study this manual before assembly and
operation. This manual must be kept in good condition, and should be considered as part of the machine.
Furthermore, the manual must be kept to hand and within the vicinity of the machine so that it is
accessible to operators when using, maintaining or repairing the machine.
A product of the FELDER GROUP
Note: Year of construction
The machine number of this machine will be printed on this operating manual
The final two digits of the machine number show the year of construction of this machine
e.g. XXX.XX.XXX.10 -> Year of manufacture 2010
To Next Page
Loading...
Need help?
General
