Hammer N3700 e-classic - Page 2

2
!
Bandsaw
N3700 e-classic / N3800 / N4400
© Felder KG
KR-FELDER-STR 1
A-6060 Hall in Tirol
Tel. +43 (0) 5223 45 0 90
Fax. +43 (0) 5223 45 0 99
E-Mail: info@hammer.at
Internet: www.hammer.at
HAMMER A product of the FELDER GROUP!
For the safety of all personnel, it is necessary to study this manual thoroughly before assembly and
operation. This manual must be kept in good condition and should be considered as part of the machine.
Furthermore, the manual must be kept to hand and within the vicinity of the machine so that it is accessi-
ble to operators when using, maintaining or repairing the machine.
Attention! The machine must be inspected immediately upon arrival. If the machine has been damaged
during transport, or if any parts are missing, a written record of the problems must be submitted to the
forwarding agent and a damage report compiled. Also be sure to notify your supplier immediately.
Note: Year of construction
The machine number of this machine will be printed on the cover sheet of this operating manual..
The final two digits of the machine number show the year of construction of this machine..
e.g. XXX.XX.XXX.15 -> Year of construction 2015