111
Save the Setup
Change the SETUP name
1
2
3
Select the SETUP file you want to change the name of.
Press the [3] NAM button. This is the SETUP NAME IN-
PUT mode.
Input the new SET UP NAME.
[PARAM] BUTTON
Move the cursor.
You can use up to 16 letters.
[VALUE] BUTTON
Choose the letters by this.
You can use Large and small characters, digits and signs/
symbols.
If you press this button, holding down the [RECORD] but-
ton, you can move to the head/the first letter of each type
(= space, 0, A, a).
Move the cursor to the right end by the [PARAM] button.
[ENT] will be displayed.
Press the [4] ENT button.
The SETUP NAME will be changed.
5
4
To Next Page
Loading...
Need help?
General
