3
Remove the instrument and accessories from the packaging and verify damage
has not occurred during shipping. Remove protective lm from meter. Notify
your nearest Hanna Customer Service Center if damage is observed.
Each instrument is supplied with:
edge®
Bench cradle
Wall cradle
Electrode holder
USB cable
5 Vdc Power Adapter
Instruction Manual
Quality Certicate
Model Specic Components include:
HI 2020 (pH) HI 2030 (EC) HI 2040 (DO)
HI 11310: Digital pH Electrode
with integrated temperature
sensor
HI 763100: Digital 4 ring
conductivity probe with
integrated temperature
sensor
HI 764080: Digital
polarographic dissolved
oxygen probe with integrated
temperature sensor
pH 4.01, 7.01 & 10.01 Buer
Sachets
1413 µS/cm and 12.88 mS/cm
Conductivity Standard
Sachets
HI 7041S Electrolyte
for DO probe
HI 700601 General Purpose
Cleaning Solution
2 DO membrane caps for
HI 764080 DO probe
2 replacement O-rings for
membrane caps
Before using this product, make sure that it is entirely suitable for your specic
application and for the environment in which it is used.
Operation of this instrument may cause interference to other electronic
equipment, requiring the operator to take steps to correct interference. Any
variation introduced by the user to the supplied equipment may degrade the
instrument’s EMC performance.
To avoid damages or burns, do not put the instrument in microwave ovens.
For your and the instrument’s safety, do not use or store the instrument in
hazardous environments.
Note: Save all packing material until you are sure that the instrument works
correctly. Any defective item must be returned in its original packing.
Included
Safety
Measures
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
