23
RECOMMENDATIONS FOR USERS
Before using these products, make sure that they are entirely suitable for
the environment in which they are used.
Operation of these instruments in residential area could cause
unacceptable interferences to radio and TV equipment, requiring the
operator to follow all necessary steps to correct interferences.
The glass bulb at the end of the pH electrode is sensitive to
electrostatic discharges. Avoid touching this glass bulb at all times.
During calibration, ESD wrist straps should be worn to avoid possible
damage to the electrode by electrostatic discharge.
To maintain the EMC performance of this equipment, the recommended
cables noted in the user's manual must be used. Any variation
introduced by the user to the supplied equipment may degrade the
instrument's EMC performance.
To avoid electrical shock, do not use these instruments when voltages at
the measurement surface exceed 24 Vac or 60 Vdc.
To avoid damage or burns, do not perform any measurement in microwave
ovens.
All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.
Hanna Instruments reserves the right to modify the design, construction
or appearance of its products without advance notice.
To Next Page
Loading...
