13
GENERAL OPERATIONS
Date Format
Press the Modify key to change the Date Format.
Use the keys to select the desired format.
Press the Select key to confirm or ESC to return to the Setup menu
without saving the new format.
Decimal Separator
Option: Comma ( , ) or Period ( . )
Press the functional key to select the desired decimal separator.
The decimal separator is used on the measurement screen and
CSV files.
Language
Press the Modify key to change the Language. Use the
keys to select the desired language.
Press Select to choose one of the 7 languages installed.
Beeper
Option: Enable or Disable
When enabled, a short beep is heard every time a key is pressed.
A long beep alert sounds when the pressed key is not active or an
error is detected. Press the functional key to enable/disable the
beeper.
Instrument ID
Option: 0 to 999999
This option is used to set the instrument’s ID (identification
number). Press the Modify key to access the instrument ID screen.
Use the functional keys or the keys to highlight the digit
to be modified. Press the keys in order to set the desired
value. Press the Accept key to confirm the value or ESC to return
to the Setup menu without saving the new value.
To Next Page
Loading...
Need help?
General
