English
9
2. Initial Operation
2.1 Managing and Charging the Battery
Before using the HannsNote2 for the first time, fully charge the battery. This HannsNote2 has a
built-in polymer battery; use only compatible power adapter to charge the device.
In order to prolong the service life of the device, use the device until the battery is depleted before
charging the battery the first two times.
NOTE:
For the first two times of charging the battery, the charging time may take up to 2 hours.
During charging, the battery icon on the screen will scroll.
When charging is complete, the battery icon will turn black and stop scrolling.
When the device is not in use, be sure to turn off the device.
If the device will not be used for a long time, be sure to discharge and then charge the battery once
a month.
The built-in polymer battery must be recharged regularly. Battery damage caused by depletion or by
the use of an unauthorized charger/ power adapter are not covered by the warranty.
To charge the battery, connect the compatible power adapter to the device.
When you plug in the charger after the device shuts down due to low power, it may take a while before the
system enters the Home screen.
Please avoid always plugging in and charging. Constant charging while using for a long period can
lead to a decrease in the battery's lifespan or pose a risk of a swollen battery.
To Next Page
Loading...
Need help?
General
