EasyManua.ls Logo

Hanse 370 - 1. Installations and Systems; 1.1. Tank capacities

Default Icon
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
H A N S E 3 7 0
16
Chapter 2 – Further Technical
Details
1. Installations and Systems
1.1. Tank capacities
1 Fuel tank
approx.
140 l
The tank is located underneath the bet in the stern
cabin. He is equipped with electrical transmitting
devices, inspection lids and connecting conduits with
valves, as well as with discharge valves and
ventilation.
1 Fresh water tank
approx.
300 l
The fresh water tanks are equipped with inspection
lids, compensating joints, valves and ventilation. The
tanks are located underneath the saloon floor.
1 Black water tank
approx.
30 l
The tank is located in the immediate vicinity of the
toilet.
The tank is firmly installed. The system includes
appropriate valves and deck openings to suck out
the content on shore and a seacock for direct
discharge into the sea.
The black water indicator is located on the central
control panel (see also contract specification).
1.2. Water systems
1.2.1. Drinking water
The yacht has1 water tank with a total capacity of approx. 300 l. Each tank is provided with an
opening at the top for cleaning.
The filler necks are located on the forecastle.
Before filling, check whether the marking on the filler neck is correct.
The pressure water pump (12 V) draws the water from the tanks and feeds cold water to the taps.
A pressure vessel ensures steady water pressure in the drinking water system. When taps are
opened, the pump is activated. When they are shut, the pump is switched off by the counter-
pressure.
Should the pump continue to run, the system must be checked for leakage.
2

Table of Contents