Hanse 370 - CHAPTER 1 SAFETY NOTES; 1. Description of the Boat; 1.4. Drive System; 1.5. Safety Notes

H A N S E 3 7 0
i
Table of Contents
Introduction III
Design Category, Identification IV
Builder’s Plate IV
Warning Notes V
Declaration of Conformity VII
Annex to the Declaration of Conformity VIII
Certificate of Conformity IX
CHAPTER 1 SAFETY NOTES 1
1. Description of the Boat 1
1.1. GENERAL DESCRIPTION 1
1.2. MAIN DATA 1
1.2.1. Main dimensions 1
1.2.2. Displacement and masses 2
1.2.3. Maximum number of persons and load capacity 2
1.2.4. Motorization 4
1.2.5. Electrical system 4
1.3. GENERAL PLAN 5
1.3.1. Description of the structure 5
1.3.2. Furnishing plan 8
1.4. DRIVE SYSTEM 9
1.4.1. Engine room, motoring 9
1.5. SAFETY NOTES 9
1.5.1. Flooding, watertight integrity 9
1.5.2. Hull openings, seacocks 10
1.5.3. Stability 11
1.5.4. Fire protection 11
CHAPTER 2 – FURTHER TECHNICAL DETAILS 16
1. Installations and Systems 16
1.1. TANK CAPACITIES 16
1.2. WATER SYSTEMS 16
1.2.1. Drinking water 16
1.2.2. Seawater 17
1.2.3. Black water 17
1.2.4. Bilge system 19
1.3. FUEL SYSTEM 19
1.4. STEERING SYSTEM 20
1.5. ELECTRICAL SYSTEMS 20
1.5.1. Direct current system 21
1.5.2. Alternating current system 23
1.5.3. Navigation systems 23
1.6. ANCHORING, TOWING AND MOORING EQUIPMENT 24
1.6.1. General 24
1.6.2. Anchoring 24
1.6.3. Towing 24
1.6.4. Mooring 24
1.7. ENGINE SYSTEM 25
1.7.1. Structure of the engine room 25
Include the opening for the sail drive in your regular inspections. 25
The exact description of the drive plant is in the operating instruction for the engine. 25
1.7.2. General 25
1.7.3. Instruments 25
1.7.4. Cooling system 26