Operation
Page EN-19
Setting the suction
force
Suction force control unit
(2)
Set the suction force using the
suction force control unit (2).
• Push the suction force control
unit towards MAX to increase
the suction force.
• Push the suction force control
unit towards MIN to decrease
the suction force.
• Use low suction force to re-
move dust from curtains and
drapes, medium suction force
to vacuum carpets and uphol-
stery, and high suction force
to clean flooring.
Air by-pass vent
(24)
You can further adjust the suction
force as needed by using the air
by-pass vent (24). The covering of
the air by-pass vent can be adjust-
ed as desired.
Should you accidentally
vacuum up something,
opening the air by-pass vent
immediately reduces the suction
force. This action will sometimes
prevent vacuumed-up items from
being drawn into the vacuum
bag.
To Next Page
Loading...
