Need help?Do you have a question about the Hantek TO1112C and is the answer not in the manual?
General| Bandwidth | 100 MHz |
|---|---|
| Sample Rate | 1 GSa/s |
| Channels | 2 |
| Display | 7 inch LCD |
| Display Resolution | 800 x 480 |
| Vertical Resolution | 8 bit |
| Interface | USB host, USB device |
| Weight | 2.5 kg |
| Record Length | 40K |
| Vertical Sensitivity | 2 mV/div - 10 V/div |
| Trigger Modes | Edge, Pulse, Video, Slope |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Input Impedance | 1 MΩ ± 2% |
| Timebase Range | 5 ns/div - 50 s/div |
General safety precautions to prevent injury and product damage during use.
Provides instructions for routine maintenance and proper cleaning methods for the oscilloscope.
Procedure for inspecting the packaging for damage upon receiving the oscilloscope.
Guidance on verifying the presence and condition of all included accessories.
Instructions for connecting the power adapter and charging the instrument's batteries.
Procedure for powering on the instrument and performing a basic boot check.
Detailed steps for calibrating oscilloscope probes to ensure accurate measurements.
Explains how to use the touch screen for basic operations like tapping menus and buttons.
To Next Page
