25
8-2-1. Setup Group for Program Repeat Frequency
Signal Item Setup range Display condition
Initial value
Setup group for program
repeat frequency
It sets up the repeat frequency and set up items.
Repeat
frequency setup
0 : limitless frequency / 1~99 Always 1
※ Setup group for program repeat frequency is indicated if the system is operated as follow when power is ON.
Power
ON
2.5 sec.
1) Set up of repeat frequency : It is an item the decides the number of repetition for the program
established in each pattern. It keeps repeating when “0” is set and
the number could range from 1 to 99.
To Next Page
Loading...
Need help?
General
