To Next PageTo Next PageWhat to do if my Harbor Breeze Fan will not start?
If your Harbor Breeze Fan won't start, there are several potential causes. First, check the main and branch circuit fuses or circuit breakers. Second, examine the line wire connections to the fan, ensuring the main power is turned off. Finally, replace the battery in the remote with a new one.
Why is my Harbor Breeze HIVE Fan so noisy?
If your Harbor Breeze Fan sounds noisy, it could be due to loose screws in the motor housing. Check to make sure all screws in the motor housing are snug, but do not overtighten them. Another cause could be that the wire connectors inside the housing are rattling. Ensure the wire connectors are not rattling against each other or against the interior wall of the motor assembly.
General| Fan Type | Ceiling Fan |
|---|---|
| Number of Blades | 5 |
| Mounting Options | Downrod Mount |
| Remote Control Included | Yes |
| Fan Diameter (in.) | 52 |
| Blade Span | 52 inches |
| Reversible Motor | Yes |
| Motor Type | AC Motor |
| Motor Speed | 3 speeds |
Crucial safety precautions for installation and operation, including electrical safety and mounting.
Details on device compliance with FCC rules for interference and operation.
Instructions to turn off electricity at the main fuse box before assembly.
Separating the ceiling bracket from the motor assembly.
Securing a metal octagonal outlet box to the building structure.
Securely attach the ceiling bracket to the outlet box.
Loop the ceiling support cable over the ceiling bracket hook.
Instructions for setting the transmitter code on the remote control.
Instructions for setting code switches on the receiver to match the remote.
Connecting grounding leads and fan receiver wires to supply wires.
Pushing leads into the ceiling bracket and ensuring connections are tight.
Securing the motor assembly to the ceiling bracket.
Removing preassembled switch housing screws from the motor assembly.
Installing the bulb for the light kit, with safety precautions.
Positioning and securing the glass shade onto the motor assembly.
Positioning and securing the steel cap for use without the light kit.
Instructions to restore electrical power to the outlet box.
Installing the 12-volt battery into the remote control.
Details on using the remote to control fan speed, dim lights, and turn on/off.
Recommendations for cleaning the fan using soft cloths and avoiding abrasive agents.
Information on replacing the bulb and the remote control battery.
Advice on periodically checking screws for tightness to ensure security.
Diagnosing and correcting issues when the fan fails to start.
Diagnosing and correcting causes of fan noise.
Details on the fan's lifetime motor warranty and 2-year component warranty.
Procedure for obtaining warranty service, including proof of purchase.
Conditions not covered by the warranty, such as finish changes and glass.
