EasyManuals Logo

Harman Kardon AVR 171 User Manual

Harman Kardon AVR 171
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
36
AVR
Specifications
Specifications
Audio Section
Stereo power: AVR 1710/AVR 171: 100W per channel,
two channels driven @ 6/8 ohms, 1kHz,
<0.9% THD
AVR 1610/AVR 161: 85W per channel, two
channels driven @ 6/8 ohms, 1kHz, <0.9%
THD
Multichannel power: AVR 1710/AVR 171: 100W per channel,
two channels driven @ 6/8 ohms, 1kHz,
<0.9% THD
AVR 1610/AVR 161: 85W per channel, two
channels driven @ 6/8 ohms, 1kHz, <0.9%
THD
Input sensitivity/impedance: 250mV/27k ohms
Signal-to-noise ratio (IHF-A): 100dB
Surround system adjacent channel
separation:
Dolby Pro Logic/DPLII: 40dB
Dolby Digital: 55dB
DTS: 55dB
Frequency response (@ 1W): 10Hz – 130kHz (+0dB/–3dB)
High instantaneous current
capability (HCC):
±40 amps (AVR 1710/AVR 171);
±29 amps (AVR 1610/AVR 161)
Transient intermodulation
distortion (TIM):
Unmeasurable
Slew rate: 40V/sec
FM Tuner Section
Frequency range: 87.5 – 108.0MHz
Usable sensitivity IHF: 1.3µV/13.2dBf
Signal-to-noise ratio (mono/stereo): 70dB/68dB
Distortion (mono/stereo): 0.2%/0.3%
Stereo separation: 40dB @ 1kHz
Selectivity (±400kHz): 70dB
Image rejection: 80dB
IF rejection: 80dB
AM Tuner Section
Frequency range: 520 – 1710kHz (AVR 1710/AVR 1610)
522 – 1620kHz (AVR 170/AVR 160)
Signal-to-noise ratio: 38dB
Usable sensitivity (loop):
500µV
Distortion (1kHz, 50% mod): 1.0%
Selectivity (±10kHz): 30dB
Bluetooth Section
Frequency range: 2402MHz - 2480MHz
Transmitter power: 0-4dBm
Modulation:
GFSK, π/4-DQPSK, 8-DPSK
Functions: Streaming audio play, supports Bluetooth
3.0, A2DP v1.2, AVRCP v1.4
Video Section
Television format: NTSC (AVR 1710/AVR 1610);
PAL (AVR 171/AVR 161)
Input level/impedance: 1Vp-p/75 ohms
Output level/impedance: 1Vp-p/75 ohms
Video frequency response (composite
video):
10Hz – 8MHz (–3dB)
HDMI: HDMI 1.4 with 4k x 2k bypass
General Specifications
Power requirement: 120V AC/60Hz (AVR 1710/AVR 1610);
220V – 240V AC/50Hz – 60Hz (AVR 171/
AVR 161)
Power consumption:
<0.5W (standby);
510W maximum (AVR 1710/AVR 171);
450W maximum (AVR 1610/AVR 161)
Dimensions (W x H x D):
17-5/16" x 4-3/4" x 11-3/16"
(440mm x 121mm x 300mm)
Weight
(AVR 1710/AVR 171): 11 lb (5.1kg)
(AVR 1610/AVR 161): 10 lb (4.6kg)
Depth measurement includes knobs, buttons and terminal connections.
Height measurement includes feet and chassis.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Harman Kardon AVR 171 and is the answer not in the manual?

Harman Kardon AVR 171 Specifications

General IconGeneral
Receiver typeSurround
Output impedance75 Ω
Input sensitivity250 mV
Maximum input power510 W
Audio output channels- channels
Signal-to-Noise Ratio (SNR)100 dB
Total Harmonic Distortion (THD)0.07 %
Power output per channel (20-20KHz@8 Ohm)100 W
HDMI in6
AC (power) inYes
Composite video in1
Digital audio optical in2
Headphone connectivity3.5 mm
Speakers connectivity type-
AM band range522 - 1620 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Internet radio services supportediTunes
Cable length1.8 m
Product colorBlack
Audio decodersDolby TrueHD, DTS-HD
Volume controlDigital
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Number of products included1 pc(s)
Receiver dimensions (WxDxH)440 x 300 x 121 mm
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Weight and Dimensions IconWeight and Dimensions
Depth300 mm
Width440 mm
Height121 mm
Weight5100 g

Related product manuals