2 TABLE OF CONTENTS
3 Introduction
4 Safety Information
4 Unpacking
5 Front Panel Controls
7 Rear Panel Connections
10 Main Remote Control Functions
14 Zone II Remote Control Functions
15 Installation and Connections
15 Audio Connections
15 Video Connections
16 SCART A/V Connections
17 System and Power Connections
19 Speaker Selection
19 Speaker Placement
19 System Configuration
19 First Turn On
20 Using the On-Screen Display
20 System Setup
20 Input Setup
22 Audio Setup
22 Surround Setup
23 Night Mode Settings
24 Speaker Setup
26 Delay Settings
27 Output Level Adjustment
27 Using EzSet
28 Manual Output Level Adjustment
30 Video Setup
31 Advanced Configuration Settings
33 Operation
33 Surround Mode Chart
35 Basic Operation
35 Source Selection
35 6/8-Channel Direct Input
36 Controls and Use of Headphones
36 Surround Mode Selection
37 Digital Audio Playback
37 Dolby Digital
37 DTS
37 PCM Audio Playback
37 HDCD
37 MP3 Audio Playback
38 Selecting a Digital Source
38 Digital Bitstream Indicators
39 Speaker/Channel Indicators
39 Night Mode
40 Tape Recording
40 Front Panel Input/Output Connections
40 Output Level Adjustment
With Source Signals
41 Dim Function
41 Memory backup
42 Advanced Features
42 Front Panel Display Fade
42 Display Brightness
42 Turn-On Volume Level
42 Semi-OSD Settings
43 Full-OSD Time Out Adjustment
43 Multiroom Operation
46 Tuner Operation
46 Basic Tuner Operation
46 Station Selection
46 Preset Tuning
47 RDS Operation
47 RDS Tuning
47 RDS Display Options
47 Program Search
Table of Contents
Typographical Conventions
In order to help you use this manual with the remote control, front-panel controls and rear-panel con-
nections, certain conventions have been used.
EXAMPLE – (bold type) indicates a specific remote control or front-panel button, or rear-panel
connection jack
EXAMPLE – (OCR type) indicates a message that is visible on the front-panel information display
EXAMPLE – (Synchro type) indicates a message that is displayed on the remote control’s LCD screen
1
– (number in a square) indicates a specific front-panel control
– (number in a circle) indicates a rear-panel connection
0
– (number in an oval) indicates a button or indicator on the remote
å
– (letter in an oval) indicates a button on the Zone II remote
Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours
72500 Château-du-Loir,
FRANCE
declare in own responsibility, that the product described in
this owner’s manual is in compliance with technical
standards:
EN 55013/6:2001
EN 55020:2002
EN 61000-3-2:2000
EN 61000-3-3.1995+A1:2001
EN 60065:2002
Jurjen Amsterdam
Harman Consumer Group International
06/04
48 Programming the Remote
48 Preprogrammed Code Entry
49 Automatic Code Entry
49 Learning Commands
50 Device Priority
50 Changing Devices
51 Macro Programming
52 Punch-Through Configuration
54 EzSet Configuration
55 Renaming
56 Resetting the Remote
58 Troubleshooting Guide
58 Processor Reset
59 Appendix
61 Technical Specifications
To Next Page
Loading...
Need help?
General
