Harman AMX DVX Series - Page 101

96
NO Command Syntax Example
34
AUDMIC_COMPRESSION_R
ATIO
Command:
SEND_COMMAND <DEV>,
"'AUDMIC_COMPRESSION_RATIO-<
value>'"
Return:
AUDMIC_COMPRESSION_RATIO-<v
alue>
Description:
Sets the ratio while compressing for
the microphone port addressed by
the D:P:S.
Variables:
value={1-20}
Command:
SEND_COMMAND
MICROPHONE_1,
“’AUDMIC_COMPRESSIO
N_RATIO-20’”
Return:
AUDMIC_COMPRESSION_RA
TIO-20
35
?AUDMIC_COMPRESSION_R
ATIO
Command:
SEND_COMMAND <DEV>,
"'?AUDMIC_COMPRESSION_RATIO'"
Return:
AUDMIC_COMPRESSION_RATIO-<v
alue>
Description:
Requests the ratio while
compressing for a microphone.
Command:
SEND_COMMAND
MICROPHONE_1,
“’?AUDMIC_COMPRESSIO
N_RATIO’”
Return:
AUDMIC_COMPRESSION_RA
TIO-20
36
AUDMIC_COMPRESSION_RE
LEASE
Command:
SEND_COMMAND <DEV>,
"'AUDMIC_COMPRESSION_RELEASE
-<value>'"
Return:
AUDMIC_COMPRESSION_RELEASE-
<value>
Description:
Sets the duration of the release
phase while compressing for the
microphone port addressed by the
D:P:S.
Variables:
value={1-5000}
Command:
SEND_COMMAND
MICROPHONE_1,
“’AUDMIC_COMPRESSIO
N_RELEASE-20’”
Return:
AUDMIC_COMPRESSION_RE
LEASE-20