Harman AMX DVX Series - Page 104

99
NO Command Syntax Example
bass shelf}
43 ?AUDMIC_EQ_FT
Command:
SEND_COMMAND <DEV>,
"'?AUDMIC_EQ_FT-<band>'"
Return:
AUDMIC_EQ_FT-<band>,<type>
Description:
Requests the filter type of the
specified microphone band of the
equalizer for the microphone port
addressed by the D:P:S.
Variables:
band = {1-3}
Command:
SEND_COMMAND
MICROPHONE_1,
“’?AUDMIC_EQ_FT-1’”
Return:
AUDMIC_EQ_FT-1,bell
44 AUDMIC_EQ_GAIN
Command:
SEND_COMMAND <DEV>,
"AUDMIC_EQ_GAIN-<band>,<value
>'"
Return:
AUDMIC_EQ_GAIN-<band>,<value
>
Description:
Sets the gain on the microphone
equalizer band <band> on the
output audio port addressed by the
D:P:S
to <value>.
Variables:
band = {1-3}
value= {-12-12}
Command:
SEND_COMMAND
MICROPHONE_1,
“’AUDMIC_EQ_GAIN-1,12
’”
Return:
AUDMIC_EQ_GAIN-1,12
45 ?AUDMIC_EQ_GAIN
Command:
SEND_COMMAND <DEV>,
"'?AUDMIC_EQ_GAIN-<band>'"
Return:
AUDMIC_EQ_GAIN-<band>,<value
>
Description:
Requests the gain on the
Command:
SEND_COMMAND
MICROPHONE_1,
“’?AUDMIC_EQ_GAIN-1’
”
Return:
AUDMIC_EQ_GAIN-1,0