Harman AMX DVX Series - Page 110

105
NO Command Syntax Example
61 ?AUDMIC_LIMITER
Command:
SEND_COMMAND <DEV>,
"'?AUDMIC_LIMITER '"
Return:
AUDMIC_LIMITER-<OFF|LOW||MEDI
UM|HIGH|CUSTOM>
Description:
Requests the setting of the limiter of
a microphone.
Command:
SEND_COMMAND
MICROPHONE_1,
“’?AUDMIC_LIMITER ’”
Return:
AUDMIC_LIMITER-OFF
62 AUDMIC_LIMITER_ATTACK
Command:
SEND_COMMAND <DEV>,
"'AUDMIC_LIMITER_ATTACK-<value
>'"
Return:
AUDMIC_LIMITER_ATTACK-<value>
Description:
Sets the duration of the attack phase
while limiting for the microphone
port addressed by the D:P:S.
Variables:
value={1-2000}
Command:
SEND_COMMAND
MICROPHONE_1,
“’AUDMIC_LIMITER_ATTA
CK-20’”
Return:
AUDMIC_LIMITER_ATTACK-
20
63 ?AUDMIC_LIMITER_ATTACK
Command:
SEND_COMMAND <DEV>,
"'?AUDMIC_LIMITER_ATTACK'"
Return:
AUDMIC_LIMITER_ATTACK-<value>
Description:
Requests the duration of the attack
phase while limiting from the
microphone port addressed by the
D:P:S.
Command:
SEND_COMMAND
MICROPHONE_1,
“’?AUDMIC_LIMITER_ATT
ACK’”
Return:
AUDMIC_LIMITER_ATTACK-
20