Harman AMX DVX Series - Page 114

109
NO Command Syntax Example
Variables:
value={0~100}
74 ?AUDOUT_MAXVOL
Command:
SEND_COMMAND <DEV>,
"'?AUDOUT_MAXVOL"
Return:
AUDOUT_MAXVOL-<value>
Description:
Requests the current maximum
volume for the audio port addressed
by the D:P:S.
Command:
SEND_COMMAND
AUDIO_OUTPUT_1,
“’?AUDOUT_MAXVOL’”
Return:
AUDOUT_MAXVOL-100
75 AUDOUT_MINVOL
Command:
SEND_COMMAND <DEV>,
"'AUDOUT_MINVOL-<value>'"
Return:
AUDOUT_MINVOL-<value>
Description:
Sets the minimum volume for the
audio port addressed by the D:P:S.
Variables:
value={0~100}
Command:
SEND_COMMAND
AUDIO_OUTPUT_1,
“’AUDOUT_MINVOL-0’
”
Return:
AUDOUT_MINVOL-0