Harman AMX DVX Series - Page 119

114
NO Command Syntax Example
Return:
AUDOUT_DELAY-<value>
Description:
Requests the current delay for the
audio port addressed by the D:P:S.
Return:
AUDOUT_DELAY-20
90 AUDOUT_DUCK_ATTACK
Command:
SEND_COMMAND <DEV>,
"'AUDOUT_DUCK_ATTACK-<value>'
"
Return:
AUDOUT_DUCK_ATTACK-<value>
Description:
Sets the duration of the attack phase
while ducking for the output port
addressed by the D:P:S.
Variables:
value={1-2000}
Command:
SEND_COMMAND
AUDIO_OUTPUT_1,
“’AUDOUT_DUCK_ATTAC
K-20’”
Return:
AUDOUT_DUCK_ATTACK-20
91 ?AUDOUT_DUCK_ATTACK
Command:
SEND_COMMAND <DEV>,
"'?AUDOUT_DUCK_ATTACK'"
Return:
AUDOUT_DUCK_ATTACK-<value>
Description:
Requests the duration of the attack
phase while ducking for the output
port addressed by the D:P:S.
Command:
SEND_COMMAND
AUDIO_OUTPUT_1,
“’?AUDOUT_DUCK_ATTAC
K ’”
Return:
AUDOUT_DUCK_ATTACK-20
92 AUDOUT_DUCK_HOLD
Command:
SEND_COMMAND <DEV>,
"'AUDOUT_DUCK_HOLD-<value>'"
Return:
AUDOUT_DUCK_HOLD-<value>
Description:
Sets the duration of the hold phase
while ducking for the output port
addressed by the D:P:S.
Variables:
value={0-4000}
Command:
SEND_COMMAND
AUDIO_OUTPUT_1,
“’AUDOUT_DUCK_HOLD-
20’”
Return:
AUDOUT_DUCK_HOLD-20