Harman AMX DVX Series - Page 123

118
NO Command Syntax Example
103 ?AUDOUT_EQ_CF
Command:
SEND_COMMAND <DEV>,
"'?AUDOUT_EQ_CF-<band>'"
Return:
AUDOUT_EQ_CF-<band>,<value>
Description:
Requests the center frequency on
the equalizer setting of band
<band> on the output audio port
addressed by the D:P:S.
Variables:
band = {1-10}
Command:
SEND_COMMAND
AUDIO_OUTPUT_1,
“’?AUDOUT_EQ_CF-1’”
Return:
AUDOUT_EQ_CF-1,20
104 AUDOUT_EQ_FT
Command:
SEND_COMMAND <DEV>,
"AUDOUT_EQ_FT-<band>,<type>'"
Return:
AUDOUT_EQ_FT-<band>,<type>
Description:
Sets the filter type on the equalizer
band <band> on the output audio
port addressed by the D:P:S to
<type>.
Variables:
band ={1-10}
type={ bell, band pass, band stop,
high pass, low pass, treble shelf,
bass shelf}
Command:
SEND_COMMAND
AUDIO_OUTPUT_1,
“’AUDOUT_EQ_FT-1,bell’
”
Return:
AUDOUT_EQ_FT-1,bell