Harman AMX DVX Series - Page 126

121
NO Command Syntax Example
110 AUDOUT_EQ_MODE
Command:
SEND_COMMAND <DEV>,
"'AUDOUT_EQ_MODE-<OFF|VOICE|
MUSIC|MOVIE>'"
Return:
AUDOUT_EQ_MODE-<OFF|VOICE|M
USIC|MOVIE>
Description:
Sets the mode for the equalizer for
the audio port addressed by the
D:P:S.
Command:
SEND_COMMAND
AUDIO_OUTPUT_1,
“’AUDOUT_EQ_MODE-OF
F’”
Return:
AUDOUT_EQ_MODE-OFF
111 ?AUDOUT_EQ_MODE
Command:
SEND_COMMAND <DEV>,
"'?AUDOUT_EQ_MODE'"
Return:
AUDOUT_EQ_MODE-<OFF|VOICE|M
USIC|MOVIE>
Description:
Request the current mode of the
equalizer for the audio port
addressed by the D:P:S.
Command:
SEND_COMMAND
AUDIO_OUTPUT_1,
“’?AUDOUT_EQ_MODE’
”
Return:
AUDOUT_EQ_MODE-OFF
112 AUDOUT_EQ_ENABLE
Command:
SEND_COMMAND <DEV>,
"'AUDOUT_EQ_ENABLE-<OFF|ON>'
"
Return:
AUDOUT_EQ_ENABLE-<OFF|ON>
Description:
Sets the mode for the equalizer for
the audio port addressed by the
D:P:S.
Command:
SEND_COMMAND
AUDIO_OUTPUT_1,
“’AUDOUT_EQ_ENABLE-O
FF’”
Return:
AUDOUT_EQ_ENABLE-OFF
113 ?AUDOUT_EQ_ENABLE
Command:
SEND_COMMAND <DEV>,
"'?AUDOUT_EQ_ENABLE'"
Return:
AUDOUT_EQ_ENABLE-<OFF|ON>
Description:
Request the current mode of the
Command:
SEND_COMMAND
AUDIO_OUTPUT_1,
“’?AUDOUT_EQ_ENABLE
’”
Return:
AUDOUT_EQ_ENABLE-OFF