Harman AMX DVX Series - Page 72

67
NO Command Syntax Example
Return:
VIDOUT_FREEZE-<ENABLE|DISABLE
>
Description:
Requests the status of the freeze
setting for the video output port
addressed by the D:P:S.
Return:
VIDOUT_FREEZE-ENABLE
38 VIDOUT_MUTE
Command:
SEND_COMMAND <DEV>,
“‘VIDOUT_MUTE-<ENABLE|DISAB
LE>'"
Return:
VIDOUT_MUTE-<ENABLE|DISABLE>
Description:
Enables or disables the Video Mute
for the video output port addressed
by the D:P:S..
Command:
SEND_COMMAND
VIDEO_OUTPUT_1,
“'VIDOUT_MUTE-ENABLE"
Return:
VIDOUT_MUTE-ENABLE
39 ?VIDOUT_MUTE
Command:
SEND_COMMAND <DEV>,
“‘?VIDOUT_MUTE '"
Return:
VIDOUT_MUTE-<ENABLE|DISABLE>
Description:
Requests to see if Video Mute is
enabled or disabled on the video
output port addressed by the D:P:S..
Command:
SEND_COMMAND
VIDEO_OUTPUT_1,
“'?VIDOUT_MUTE '"
Return:
VIDOUT_MUTE-ENABLE
40 VIDOUT_OSD
Command:
SEND_COMMAND <DEV>,
“‘VIDOUT_OSD-<ENABLE|DISABL
E>'"
Return:
VIDOUT_OSD-<ENABLE|DISABLE>
Description:
Enables or Disables the On-Screen
Display (OSD) for the video output
port addressed by the D:P:S.
Command:
SEND_COMMAND
VIDEO_OUTPUT_1,
“'VIDOUT_OSD-ENABLE"
Return:
VIDOUT_OSD-ENABLE