81
NO Command Syntax Example
Description:
Requests the status of the freeze
option for the DXLink Receiver.
DXLINK_VIDOUT_FREEZE-EN
ABLE
84 DXLINK_VIDOUT_MUTE
Command:
SEND_COMMAND <DEV>,
“‘DXLINK_VIDOUT_MUTE-<ENAB
LE|DISABLE>'"
Return:
DXLINK_VIDOUT_MUTE-<ENABLE|D
ISABLE>
Description:
Enables or disables the video output
mute for the DXLink Receiver.
Command:
SEND_COMMAND
VIDEO_OUTPUT_3,
“'DXLINK_VIDOUT_MUTE-E
NABLE"
Return:
DXLINK_VIDOUT_MUTE-EN
ABLE
85 ?DXLINK_VIDOUT_MUTE
Command:
SEND_COMMAND <DEV>,
“‘?DXLINK_VIDOUT_MUTE '"
Return:
DXLINK_VIDOUT_MUTE-<ENABLE|D
ISABLE>
Description:
Requests to see if VIDEO output
mute is enabled or disabled for the
DXLink Receiver.
Command:
SEND_COMMAND
VIDEO_OUTPUT_3,
“'?DXLINK_VIDOUT_MUTE
'"
Return:
DXLINK_VIDOUT_MUTE-EN
ABLE
86 DXLINK_VIDOUT_OSD
Command:
SEND_COMMAND <DEV>,
“‘DXLINK_VIDOUT_OSD-<ENABL
E|DISABLE>'"
Return:
DXLINK_VIDOUT_OSD-<ENABLE|DIS
ABLE>
Description:
Enables or Disables the On-Screen
Display (OSD) setting for the DXLink
Receiver.
Command:
SEND_COMMAND
VIDEO_OUTPUT_3,
“'DXLINK_VIDOUT_OSD-EN
ABLE"
Return:
DXLINK_VIDOUT_OSD-ENAB
LE
87 ?DXLINK_VIDOUT_OSD
Command:
SEND_COMMAND <DEV>,
“‘?DXLINK_VIDOUT_OSD '"
Return:
DXLINK_VIDOUT_OSD-<ENABLE|DIS
Command:
SEND_COMMAND
VIDEO_OUTPUT_3,
“'?DXLINK_VIDOUT_OSD '"
Return: