Harman AMX DVX Series User Manual

85
NO Command Syntax Example
Audio SEND_COMMANDs
1 AI<input>O<group>
Command:
SEND_COMMAND <DEV>,
“‘AI<input>O<group>'"
Return:
SWITCH-LAUDIOI<input>O<group
>
Description:
Switches the audio input port to the
audio group(s), Set <input> to 0 for
disconnect.
Variables:
input = {1-14}
group= {1-4}
Command:
SEND_COMMAND
SWITCHER, “'AI1O1,2’”
Return:
SWITCH-LAUDIOI1O1
SWITCH-LAUDIOI1O2
Description:
Switch audio input port #1
to audio group #1 and #2.
2 AUDIN_DIGITAL
Command:
SEND_COMMAND <DEV>,
“‘AUDIN_DIGITAL-<format>'"
Return:
AUDIN_DIGITAL-<format>
Description:
To Set the format in EDID for the
specified Audio input port.
Variables:
format =
{
BASIC,
PCM-2CH,
PCM-8CH,
DOLBY DIGITAL,
DTS,
MPEG,
AAC,
TRUEHD,
DTSHD,
ATMOS,
DOLBY DIGITAL PLUS
}
Command:
SEND_COMMAND
AUDIO_INPUT_1,
“'AUDIN_DIGITAL-DTS'"
Return:
AUDIN_DIGITAL-DTS
Description:
Set input EDID with DTS
Audio compression format
support

Harman AMX DVX Series Specifications

General

Brand	Harman
Model	AMX DVX Series
Category	Projector Accessories
Language	English