Harman Lexicon MX400 - Balanced Analog Line Output Pairs Description; Balanced Analog Line Input Pairs Description

6. Balanced Analog Line Output Pairs
Dual RF-filtered 1/4" balanced/unbalanced TRS or balanced XLR line outputs are
servo-balanced, so no signal loss is incurred when using unbalanced connections (1/4"
inputs only). If only a single plug is connected to the Left output, both Left and
Right signals can be summed to mono by selecting Mono Left for analog output A
or B in the System Menu. Pairs are grouped and labeled as A - Front (Stereo) and
B - Rear.
7. Balanced Analog Line Input Pairs
Left and Right active analog 1/4” TRS or XLR balanced line inputs. If only a single
plug is connected to the Left input, the signal can be split and sent to both the Left
and Right input paths by selecting Analog Mono L for input source A or B in the
System Menu. Pairs are grouped and labeled as A - Front (Stereo) and B - Rear.
7
The Rear Panel
MX400