Shift 1 & 2
Determines the amount of pitch shift or detune shift from the original signal source.
Works best with individual notes.
Delay 1 & 2
Sets the delay time before the pitch shift or detune effect is heard in the Pitch Shift and
Detune effects.
Feedback 1 & 2
Adjusts how much of the shifted signal is sent back through the delay line in Pitch
Shift and Detune for creating cascading arpeggio type effects.
Pan 1 & 2
Sets the pan position in the stereo field for each tap in the 2-Tap Delay.
MX400 SySTeM MeNUS
SySteM MenuS
The MX400 System menus are where global settings are configured. These include
Surround, Stereo, or Dual Stereo Configuration, Program Auto Load, Output Level,
and Factory Restore. Changes made to these settings affect all programs in all
Configurations. Press the System button to access these menus. Turn the Page/
Select knob to scroll up and down through the available menus. Press the Exit button
to exit the System Menus.
Configuration
This menu is where you select what kind of processor you want the MX400
to run as (Surround, Stereo, or as a Dual Stereo processor). Use Knob A
to change the MX400's configuration. See page 8 ("About the MX400") for
more information on configurations.
Contrast
This utility adjusts the contrast of the Main Display to make it more vis-
ible at different viewing angles. Use Knob B to adjust the display’s view-
ing angle to your liking.
Program Load
MX400 programs can be loaded manually or automatically as each pro-
gram is selected. The default setting is Manual. Use Knob C to select
which method of program loading you need.
30
MX400 System Menus
To Next Page
Loading...
Need help?
General
