Step 1 - Down
Drive onto and stop in the middle of the
platform. Apply the brakes of your chair or
scooter.
Step 2
Verify that the emergency stop button is not
activated by giving it a quick turn clockwise.
Step 3
Press and hold the DOWN rocker. The lift
will move in the down direction and stop
when it reaches the lower landing.
Warning: Always verify the lift’s
access ramp unfolds fully and rests
on the ground. If not contact your
Harmar Dealer for assistance.
Step 4
Release the brakes on your chair or scooter
and drive off the platform.
21
To Next Page
Loading...
