3Features and Specifications Introduction
The table below lists the available management interfaces according to
the management purpose for which they are designed:
Purpose Recommended Tool
Preliminary
configuration and
monitoring of a
single NSG device
Control Panel
The NSG control panel is comprised of a display area and
key pad located on the front panel of the NSG. The control
panel is active once the NSG boots up and provides
means for preliminary configuration of a single NSG
device. It also allows you to monitor the NSG's status, view
its alarms (if present), and troubleshoot them. For details
on accessing the web client, please see the NSG Web
Client..
Configuration and
monitoring of a
single NSG device
The NSG web client is an on-board web-based user
interface, that is an integral part of the NSG firmware. The
web client is accessible through Microsoft Internet
Explorer, and provides means for configuring a single
NSG device. It also allows the user to monitor the NSG's
status, view its alarms (if present), and troubleshoot them.
For details on accessing the web client, see Chapter 2,
“Connecting Power,” .
To Next Page
Loading...
