20 DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 3: Operation
Operating Notes
When you change a control parameter on a DA-DHR/DH/DSR/DS/HR/
H6802+ module, the effect is immediate. However, the module requires
up to 20 seconds to save the latest change. After 20 seconds, the new
settings are saved and will be restored if the module loses power and
must be restarted.
Understanding Jumper Controls
Introducing Jumper Control Types
Figure 3-1. Location of the Jumper Sets
To Next Page
Loading...
