Need help?Do you have a question about the Haskris R1600 and is the answer not in the manual?
General| Cooling Capacity | 1600 W |
|---|---|
| Temperature Range | 5°C to 35°C |
| Refrigerant | R134a |
| Voltage | 115 VAC or 230 VAC |
| Compressor Type | Hermetic |
| Reservoir Capacity | 5.7 liters (1.5 gallons) |
| Power Requirements | 115 VAC, 60 Hz, 15 A or 230 VAC, 50 Hz, 8 A |
Contact information and support channels for installation questions and issues with Haskris Co.
Contact information for Hitachi Medical Systems America (HMSA) for support and spare parts.
Information on power requirements, wiring diagrams, and recommendations for electrical installation.
Checklist requirements that must be completed and faxed to Haskris before scheduling a 'No Load' Start-Up.
Instructions to energize crankcase heaters 12 hours before start-up to evaporate liquid refrigerant.
Detailed steps for performing a 'No Load' start-up, requiring a Haskris authorized representative.
Procedure for conducting a 'Full Load' system check, requiring coordination with HMSA and a Haskris representative.
Details on the factory pre-set glycol solution temperature and allowable adjustments.
Explanation of the bypass/relief valve's function in modulating water pressure and its two basic functions.
Description of refrigerant pressure controls that prevent compressors from operating at unsafe pressures.
Recommendation for changing the entire glycol solution based on pH or other factors.
Steps to be performed by a Haskris Authorized Representative for PM system check.
To Next Page
