Hatz 1B30 - Engine Type Plate

1B20, 1B30, 1B40, 1B50 Technical data
HATZ
23Manual
Engine specifications
Model Description
R for rammer operation (1B20R only)
T normal counter balance (1B40T and 1B50T only)
U additional counter balance (1B40U and 1B50U only)
Screw tightening torque
Designation Nm
Oil drain screw 50
4.2 Engine type plate
EMISSION CONTROL INFORMATION
MOTORENFABRIK HATZ KG ¬ D-94099 RUHSTORF
GMBH
+CO
Model:
S/N:
Power:
Displ:
Eng.Fam:
Emission Control System:
Power Category:
ULTRA LOW SULFUR DIESEL FUEL ONLY.
THIS ENGINE COMPLIES WITH U.S. EPA REGULATIONS
FOR MY2018 NONROAD DIESEL ENGINES.
EU-Type:
www.hatz-diesel.com
Build:
PV:
E
1
The engine type plate is located on the sound protection hood and contains
the following engine information:
1 Model designation of the engine
2 Engine serial number
3 Engine power (kW) at rated speed (rpm)
4 Displacement (liters)
5 Information for US emission certification (EPA/CARB)
6 EU type approval number
7 EU country of origin (Germany)
8 Model year (month/year)
9 Test specification for special settings