Hatz 1B30 - 7.4.2 Starting the engine with a starter

Operation and use 1B20, 1B30, 1B40, 1B50
40
HATZ
Manual
NOTICE
i
When the exhaust emits white smoke after several failed
start procedures:
▪ Move the speed controller lever to the "Stop" position.
▪ Pull the starting rope all the way out five times.
▪ Reset the speed adjustment (see chapter 7.3 Setting the
speed control, page 37).
▪ Repeat the start procedure.
7.4.2 Starting the engine with a starter
Overview – HATZ instrument boxes
Standard (instrument box attached on the engine)
0
I
II
Option (external instrument box)
0
I
II