Hatz 1B30 - Filling the Oil Bath Air Filter (Option)

Transport, assembly and commissioning 1B20, 1B30, 1B40, 1B50
34
HATZ
Manual
6.5 Filling the oil bath air filter (option)
Overview
1 Clamp fastener (2x opposing)
2 Oil container
3 Filter insert
4 Gasket
5 Level mark
Procedure
Step Activity
1 Release the clamp fasteners (1).
2 Remove the oil container (2).
3 Take the filter insert (3) out of the oil container.
4 Fill the oil container with engine oil up to the level mark (5).
5 Insert the long end of the filter insert (3) into the oil container.
6 Mount the oil container, ensuring that the gasket (4) is properly
positioned and the locks (1) are correctly fastened.