Hatz 1B30 - Draining the engine oil

To Next Page

To Previous Page

Maintenance 1B20, 1B30, 1B40, 1B50

HATZ

Manual

CAUTION

Danger of later engine damage.

▪ Operating the engine with an oil level below the min. mark

or above the max. mark can lead to engine damage.

▪ When checking the oil level, the engine must be horizontal

and have been switched off for a few minutes.

NOTICE

▪ The engine must be level.

▪ The engine must be switched off.

▪ Only drain engine oil while it is warm.

Draining the engine oil

Overview

Without oil sump With oil sump

1 Oil drain screw

2 Seal ring

Procedure

Step Activity

1 Keep a container ready for collecting the used oil. The con-

tainer must be large enough to hold the entire amount of en-

gine oil.

2 Unscrew the oil drain screw (1) and drain the oil entirely.

3 Clean the oil filter when required (every 1000 hours of opera-

tion), see chapter 8.2.5 Clean the oil filter, page 64.

Other manuals for Hatz 1B30