Hatz 1B30 - Cleaning the exhaust screen in models for rammer operation (1 B20 R)

To Next Page

To Previous Page

1B20, 1B30, 1B40, 1B50 Maintenance

HATZ

77Manual

Step Activity Figure

7 Insert the exhaust manifold

with the bracket (2) into the

hole and pull it back to the out-

side so that the bracket can no

longer become unhooked.

8 Tighten the hex nut.

Clean the exhaust screen in models for rammer operation (1B20 R)

Step Activity Figure

1 Release the hex nut and take

off the exhaust manifold (1).

2 Remove the hex nut from the

bracket (2) and pull out the

screen insert (3).

3 Remove the deposits in the

screen insert with a suitable

wire brush.

Other manuals for Hatz 1B30