Hatz 1B30 - Model with fuel filter in tank

Maintenance 1B20, 1B30, 1B40, 1B50
80
HATZ
Manual
CAUTION
Dirt particles can damage the injection system.
▪ Maintain clean conditions to ensure dirt does not enter the
fuel line.
Procedures
The fuel filter can be changed in different ways depending on how the en-
gine is equipped:
▪ Model with fuel filter in tank
▪ Model with double fuel filter system
▪ Model with external fuel filter
Model with fuel filter in tank
Step Activity Figure
1 Open the fuel cap (1) and pull
the fuel filter (2) out of the tank
by the cord.
2 Pull the fuel feed line (3) off of
the fuel filter (4) and insert a
new filter.
3 Insert the fuel filter back into
the tank.
4 Close the fuel cap.
The fuel system is bled auto-
matically.