102 4001055180 E 06.21 USA / GB
HA26 RTJ O - HA26 RTJ O SW - HA26 RTJ PRO - HA26 RTJ PRO SW -
HA80 RTJ O - HA80 RTJ PRO
C
- Familiarization
5 - Machine specifications
5.1 - MOVEMENT SPEED
To allow checking operation, refer to the following table about originally time per movement. If the
values measured by test are not equal to the following :
• Do not use the machine.
• Setting updating is needed.
Always check speed movement from the ground control box.
HA26 RTJ O - HA80 RTJ O HA26 RTJ PRO - HA80 RTJ PRO
Low drive speed 1,2 km/h / 0.7 mph
High drive speed 5 km/h / 3.1 mph
Maximum towing speed 5 km/h / 3.1 mph
Time for telescopic boom extension 60 s +/-5
Time for telescopic boom retraction 60 s +/-5
Time for raising boom 44 s +/-4
Time for descent boom 44 s +/-4
Time for continue turntable rotation 33 s +/-3 (per 1/2 rotation)
Time for complete left / right cage rotation 22 s +/-3
Time for arm lifting 50 s +/-5
Time for descent arm 50 s +/-5
Time for jib lifting 30 s +/- 3 s
Time for jib descent 30 s +/- 3 s
Time for raising compensation 15 s +/- 2 s
Time for lowering compensation 15 s +/- 2 s
Stop point to stop point steering 5 s +/- 1 s