153 4001055180 E 06.21 USA / GB
Turntable
Universal plug
MS0133
Turntable
Universal plug
1 - You will need
2 - Procedure
• The tracker with its cable.
• A clamp to strip the wires.
• A clamp to crimp the wires.
• Place barriers around the perimeter of the work area
1 person
Step 1 :
• Disconnect the plug 2.
• Remove the caps on the plug.
Step 2 :
• Pick up the pins in the plastic bag.
• Strip the wires of the tracker.
• Crimp the wires with the pins with a crimping clamp.
Step 3 :
• Take the wedgelock off the plug.
• Thread the wires in the positions regarding the information.
To Next Page
Loading...
