269 4001055180 E 06.21 USA / GB
Chassis
Wheel reducer level procedure
MP0002
Chassis
Wheel reduce r level procedur e
1 - Concerned machines
• HA20 LE - HA20 LE PRO - HA61 LE - HA61 LE PRO
• HA20 RTJ PRO - HA61 RTJ PRO
• HA26 RTJ O - HA26 RTJ O SW - HA26 RTJ PRO - HA26 RTJ PRO SW - HA80 RTJ O - HA80 RTJ PRO
• HT26 RT O - HT26 RT O SW - HT28 RTJ O - HT28 RTJ O SW - HT28 RTJ PRO - HT28 RTJ PRO SW - HT80 RT
O - HT85 RTJ O - HT85 RTJ PRO
2 - Warning
3 - Risk prevention
Means of protection to be used when implementing the range
4 - You will need
• Only an authorised and qualified technician is permitted to work on the machines HAULOTTE®.
• The use of this form implies that its user has been trained on this type of equipment.
• It is important that the person working on the machine is familiar with all of the safety information
contained in the user manual.
• Generally speaking, the user must comply with regulatory obligations in force, particularly those relating
specifically to working alone, co-activity and manual load handling...
• The user must have all the permits/authorizations required to work (fire permit, etc.) and comply with the
specific safety instructions at the intervention site.
• Only risks linked specifically to activities relating to the disassembly and assembly of the
machine HAULOTTE® are described in this sheet.
Appropriate workwear Gloves
Safety shoes
• "DO NOT OPERATE" tag
• Standard tool kit
• Jack 20T
• Chocks 4000mm
• 1 syringe for oil filling
• Oil collection pan
Place barriers around the perimeter of the work area
1 person
To Next Page
Loading...
