Normal
0.0%
Press
Press
Press
Min: 0.0%
0.0%
Press
Operation Mode
Current temperature inside probe housing (ºCelsius).
Programmed switch On / switch Off delay (seconds).
Minimum captured Sensor Value % since last history
log reset, or last Cal Mounting operation.
Normal / Comms Retry / Fail
Sensor Value
0.0%
Temp: 23.3C
0.0%
Delay: 0.1S
0.0%
(Continued next page)
FLOW CHART
DIAGNOSTIC DISPLAYS (Remote type only)
The diagnostic displays appear on the top line of the LCD, after pressing the Up or
Down push button when the Gladiator switch is in its normal running mode.
The diagnostics provide the user with valuable performance feedback on how the
instrument is performing whilst in operation.
The measured reading Sensor Value (%) continues to be displayed on the second
line of the LCD during diagnostic viewing on the top line. Ouput relays will continue to
operate during diagnostic viewing.
To Next Page
Loading...
Need help?
General
