DECLARATION OF CONFORMITY
Manufacturer’s Name: HAWK MEASUREMENT SYSTEMS PTY LTD
Manufacturer’s Address: 15–17 Maurice Court
Nunawading, Vic.
Australia 3131
declares that the product Gladiator Variable Admittance Level Switch series
Models AS2000, AS2100, AS2200, AS2210, and GARP.
conform to the following product specifications:
Low Voltage Directive: 73/23/EEC
Amendment Directive: 93/68/EEC
EMC Directive: 89/336/EEC
ATEX Directive: 94/9/EEC
Standards in whole or in part to which conformity is declared:
Normative Documents: EN 61326: 1997 +Amendment 1: 1998 + Amendment 2:2001
EN 61010-1:2001
BS EN 50014:1998
EN 50281-1-1:1998
Standards: IEC 1000-3-2: 1995
IEC 1000-3-3: 1994
IEC 1000-4-2: 1995
IEC 1000-4-3: 1995
IEC 1000-4-4: 1995
IEC 1000-4-5: 1995
IEC 1000-4-6: 1996
IEC 1000-4-11: 1994
Supplemental Information:
The product herewith complies with the requirements of Low Voltage Directive 73/23/EEC, Amendment
Directive 93/68/EEC, and EMC Directive 89/336/EEC, when the probe is installed to monitor material in a
closed metal vessel, and carries the CE-marking accordingly. The Remote amplifier is safe for operation
in Category 3 hazardous locations (Zone 2/22) and the Integral and Remote Probes have been designed
to operate in Cat 1 and 2 (Zone 20/21) dust locations. The ATEX marking code is
®
II 3 GD IP67 T65ºC.
Signature:
Name: Colin Prohasky
Position: Engineering Manager
Date: 10 October 2007
Place: Melbourne, Australia.
HAWK MEASUREMENT SYSTEMS
PTY. LTD. A.C.N. 006 782 449
15-17 MAURICE COURT
NUNAWADING VIC. 3131
P.O. BOX 286 NUNAWADING
VIC. 3131 AUSTRALIA
EMAIL: HawkSales@hawk.com.au
PH: +61-3 9873 4750
FAX: +61-3 9873 4538 (Sales/Engineering)
FAX: +61-3 9873 4384 (Accounts/Production)
To Next Page
Loading...
Need help?
General
