12
LCD Liquid Crystal Display
LED Light Emitting Diode
TFT Thin Film Transistor
USB Universal Serial Bus
OPERATING INSTRUCTIONS
The LIFEPLUS MOD3 series of chargers are compatible with batteries at 24, 36, 48 and 72 or
80 volts (depending on the version supplied).
Battery recognition (voltage, capacity and state of charge) is accomplished automatically by the
microprocessor. Several charging profiles are available (Ionic, Gel, Opportunity) based on the
configuration chosen by the operator. If the charger is loaded with the Flex firmware then the
selectable profiles are Flex Fast and Flex Bloc. Furthermore, equalization and compensation
charges are integrated.
The LIFEPLUS MOD3 includes an adapter to communicate to a BBWC™. The BBWC™ is an
advanced battery module that measures, tracks and stores important battery parameters such
as temperature, electrolyte level, voltage and AH throughput. This data is wirelessly transmitted
to the LIFEPLUS MOD3 to optimize charging, alerts the operator to battery issues and
safeguards the battery from being permanently damaged.
To Next Page
Loading...
Need help?
General
