Hoc” or “Infrastructure.” If you do not have a wireless access
point and want to use peer-to-peer connection, you should
choose to run the print server in “Ad Hoc” mode. If you have a
wireless access point or router on your network, you should
choose to run the HWPS1UG in “Infrastructure” mode.
ESSID is the unique name identified by an available wireless
LAN. The ESSID prevents your print server from joining the
wrong wireless network. Please make sure to use the correct
ESSID of all stations and access points in the WLAN network
that you wish to connect to.
Channel Number is the wireless channel that your wireless
LAN is using. Please make sure that the channel number of all
stations and access points are the same as your selected WLAN.
To Next Page
Loading...
Need help?
General
