Hawking HWPS1UG User Manual

8.5.2 TCP/IP
You can configure the print server to automatically get an IP
from DHCP server or manually specify a static IP. The print
server also has a built-in DHCP server. You can enable this
DHCP server and let it manage your IP address for you.
If you need the HWPS1UG to automatically get an IP address
from the DHCP server, select “Auto IP.” You also can select
“Specify IP” to manually assign an “IP Address,” “Subnet
Mask,” and “Gateway” for the print server.
You can enable/disable the DHCP server and assign a range of
IP addresses here. The DHCP server is disabled by default.
You have to configure your “Start Address,” “End Address,”

Hawking HWPS1UG Specifications

General

Brand	Hawking
Model	HWPS1UG
Category	Print Server
Language	English