AppleTalk is a data communication protocol often used by
Macintosh computers. The HWPS1UG can use these parameters
to join the AppleTalk network and share printers with other
AppleTalk workstations. You have to setup the “Zone Name”
and “Printer Type” for each printer port of this print server.
Zone Name: The HWPS1UG has to join an AppleTalk zone
before it can be shared with other workstations. Only
workstations in the same zone can share the printer. If you
want to share the printer to all workstations in all Zones, you
should enter an “*” in the “Zone Name” field.
Printer Type: This is the type of printer attached to each
printer port. You can get the printer type from the
manufacturer of the printer.
To Next Page
Loading...
