Hawking HWPS1UG - Page 150

SNMPC The administrator
contact information
of this print server
for SNMP
admin# get SNMPC
SNMP_CONTACT=’
sbdjohn@hotmail.co
m’
SNMPL The installed
location of this print
server for SNMP
admin# get SNMPL
SNMP_LOCATION=
’Room 301’
port1 The port name of
this print server
admin# get port1
PORT1_LPTNAME=
’lpt1’
DHCPS The DHCP server is
enabled or disabled
0: disable
1: enable
admin# get DHCPS
DHCPD=0
DHCP Get dynamic IP by
DHCP is enabled or
disabled
0: disable
admin# get DHCP
DYNAMIC_IP=0