Hawking HWPS1UG - Page 159

“enabled”.
DHCP Enable or disable to
get dynamic IP by
DHCP.
The value should be
“disabled” or
“enabled”.
set DHCP disable
appletalk Enable or disable
AppleTalk printing
The value should be
“disabled” or
“enabled”.
set appletalk disable
SMBD Enable or disable
SMB printing
The value should be
“disabled” or
“enabled”.
set SMBD enable
SNMP Enable or disable
SNMP management
protocol
The value should be
“disabled” or
set SNMP enable