Input impedance may now be set separately to Tip and Ring via two
3 way switches on top.
See: Pickups & Microphones to interface 3.0,
Ch.2 / Stereo IN and XLR Microphones 8.0, Phantom Power 9.0
WARNING! - Plugging a live power amp output into EDB-2 VAP
would likely damage the unit and negate the Guarantee /
Warranty
5.0 MUTE/ LIVE SWITCHES ON Ch.1 & Ch.2
Located on top
Mute position with red LED illuminated indicates that output is off on
the Channel. They are useful for silent tuning in front of audience, to
switch off during periods of inactivity without re-setting controls, or
prevent annoying howl sound/feedback. The two Mute switches
enable easy instrument swapping and quieter plugging/ unplugging
when live
6.0 ROTARY POT CONTROLS
Located on top
ACW = Backing a knob off (left) or turning it Anti-Clockwise
CW = Turning a knob up (right) or turning it Clockwise
6.1 GAIN CONTROLS (Ch. 1 & 2: 0dB-32dB Gain) Graduated 0-10
Green knobs x 2 - Located on top
Now mixes Stereo Inputs to Jack IN on Ch.1 or Ch.2, across both
channels, while accepting Phantom Power to Ch.1 or Ch.2 Jack In
P. 33
To Next Page
Loading...