Heath Zenith 5867 User Manual

To see operational and troubleshooting information and videos,
go to www.hzsupport.com
Dated receipt required for warranty replacement.
FEATURES
• Bright, energy saving LED light
• Automatically comes on when motion is detected.
UNPACKING
Be sure to remove all contents from packaging and verify
all items are present before assembling this light xture.
is package includes the following items:
• Security Light
• Owner’s Manual
• Mounting Hardware
© 2020 HeathCo LLC 208799-03A
Motion Sensor
Light Control
Model: 5867
HARDWARE INCLUDED
Note: Six mounting bracket screws are included. e installation will only require two. Discard the unused mounting
bracket screws after installation.
Plastic plug #6 Mounting Bracket #8 Mounting Bracket
Screw (x2) Screw (x2)
Mounting Bolt Mounting Bolt (Pre-Installed in Light Fixture)
FRONT
Mounting Bracket Mini Screwdriver
180°

Heath Zenith 5867 Specifications

General

Power Source	Hardwired
Bulb Type	Incandescent
Mounting Type	Wall Mount
Material	Metal
Color	White
Weather Resistance	Weather Resistant
Type	Motion Sensor

Summary

FEATURES

UNPACKING

HARDWARE INCLUDED

IMPORTANT SAFETY AND INSTALLATION INFORMATION

INSTALLATION

WIRING

Connect the junction box wires to the terminal block and ground screw.

FINAL ASSEMBLY

Align and attach the light fixture to the mounting plate and tighten the mounting bolt.

TESTING AND ADJUSTMENTS

FINAL SETUP

Set the ON-TIME duration for how long the lights stay on after motion stops.

IMPORTANT CONSIDERATIONS

AVOID AIMING THE SENSOR AT

List of heat sources that may trigger the motion sensor, like vents or water pools.

SEASONAL CHANGES

Explains how temperature affects sensor sensitivity and may require readjustment.

MANUAL MODE

How to operate the light at full brightness using a wall switch.

SPECIFICATIONS

TROUBLESHOOTING GUIDE

TECHNICAL SERVICE

FIVE YEAR LIMITED WARRANTY

Details the limited warranty coverage, exclusions, and customer remedies.